SVX Network Forums Live Chat! SVX or Subaru Links Old Lockers Photo Post How-To Documents Message Archive SVX Shop Search |
IRC users: |
#1
|
|||
|
|||
Rear Window Defogger Grids/Metal Tab Repair
Rear Window Defogger Grids/Metal Tab Repair
Author: Subaru NUMBER: 07-50-93R DATE: 12/02/94 APPLICABILITY: ALL MODELS SUBJECT: REPAIR OF REAR WINDOW DEFOGGER METAL TAB REPAIR OF REAR WINDOW DEFOGGER GRIDS This is a reprint of Service Bulletin 7-50-93 that includes additional information. TAB REPAIR If you encounter a broken wiring tab connector from the rear window defogger grid, it is recommended the rear window NOT be replaced. The tab should be resecured using a commercially available repair kit. One such repair kit is available from Premier Autoware under part # 37827. Phone # 1-800-854-6333. Other kits may be available through your local supplier. Follow the instructions supplied with the repair kit to ensure a proper repair. GRID REPAIR Rear window defogger grids can be repaired using a kit available from Loctite Corporation Part Number 13067. Effective immediately, dealer warranty repairs will not be accepted for replacement of rear windows because of open defogger grids. Repairs should not exceed 4 in length on any one line. Diagnosis of Grids Locate the exact point of the break in the grid line as follows:
After the break in the grid line has been located, make repairs as follows:
* Sublet charges should be fair and reasonable. . Last edited by How-To Doc; 04-20-2010 at 08:10 PM. |
|
|