eg33 swap wont rev

[cruisen_15]

ok so did the 33 swap on my 92 legacy, well ive got it to idle and it kind of has a smooth idle. idles around 1000rpm and drops to 750 or so and climes back to 1000. so right when i give it any gas at all it misfires,bucks and dies....

only codes i can pull are code 12 (abnormal signal at ignition switch) with the green T connecter connected

and i do get a code 34 (egr valve innop.) i deleted this part so i epxpected this. this comes on with my black connecters connected

any ideas? i keep goin through every damn sensor but im stuck at the moment

also using a green jecs maf, are obd2 mafs different than obd1's? didnt think they were