New Updated Style Keyless Remote Fobs

[Aredubjay]

Originally Posted by intelisevil

Does anyone know what the second button in the original remote was for? If you open up the remote you'll see not one, but two switches.

Dan

I have two SVXes. I've programmed one button to open one, the other to open the other.

[Noir]

i just got a remote from keyless ride and it's pretty good. better range than my POS factory one.

[Electrophil]

Originally Posted by ensteele

If anyone has tried one, I would like to know how they work and if they programed ok.

They programmed perfectly, but there is absolutely no range increase. The routine is still right up on the car, or ground the unit to your forehead at 8 paces away from the car.

As a side note, I tried this summer to develop a new remote for the car, but could not get any range myself, so I scrapped the project.

The internals of this one uses a generic encoding chip, with a 5 input terminal to jumper for particular digital codes. On ours, it's open, since the receiver sets itself to match the transmitter. A warning on this though. If 2 of us buy one of these, and both program without any jumpers set, both cars will be able to be opened with the same transmitter.

There are actually 4 micro switches inside of the transmitters for different frequencies for different makes of vehicles. They just change the location of the outside buttons for each individual type of vehicle.

[Electrophil]

Originally Posted by ssnsltd

I know This one works

The exact same circuit board is used on this one as the original remote posted. They are just using all 4 of the microswitches inside the remote.