Transfer Clutch Plate Clearance Needed ASAP

[dan_j_b]

Could someone please look in their official subaru svx service manual and tell me when the specs are to determine what transfer clutch pressure plate I need. I am trying to get this done tonight

Dan

[Earthworm]

I'm not sure but I don't think you know until you take it apart.

[dan_j_b]

I have it apart. I"m trying to determine if it is worn out or not

[Earthworm]

Compare what you have with the thicknesses listed on Subaruparts:

Reference Link

[dan_j_b]

you mean the thickness of the pressure plate? That doesnt help me. I just need to know how thick the gap from the pressure plate to the snap ring is supposed to be. Mine is a littlle over 1mm

[Earthworm]

That's beyond my current knowledge and I don't have my FSM's with me.

[dan_j_b]

doesn't anyone have their manual handy?

[oab_au]

Originally Posted by dan_j_b

you mean the thickness of the pressure plate? That doesnt help me. I just need to know how thick the gap from the pressure plate to the snap ring is supposed to be. Mine is a littlle over 1mm

This is a bit iffey Dan, but the Limited Slip clutch that my Aust car has, 1 plate less than the Transfer clutch, that you have. WSM has the clearance as 0.2mm to 0.6mm, with 1.6mm as the allowable limit. As yours has the extra plate, the 1mm you have may be OK.

Harvey.

[dan_j_b]

Thanks, Harv