ATF Pan leaks, 96-97 cars

[92snowmachine]

Originally Posted by svxfiles

Yes the pan can be straightened.
I clamp a 1/2" thick aluminum block in my "work bench" vice,
the aluminum block is about 6" long,
the block is used as an anvil,
hold the pan on top of the anvil,
then use a small hammer to flaten out the dented places.

I use the ground and a flat punch but maybe Colorado is more hill billy than you know. don't use Fuji bond if you ever want to take it off again without bending it up.

[svxfiles]

Originally Posted by 92snowmachine

I use the ground and a flat punch but maybe Colorado is more hill billy than you know. don't use Fuji bond if you ever want to take it off again without bending it up.

From Wikipedia, the free encyclopedia
Jump to: navigation, search This article is about hillbilly as a slang term. For the subculture, see Poor White.

"The Hatfield clan in 1897Hillbilly is a term (often derogatory) for people who dwell in rural, mountainous areas in the United States, primarily in Appalachia, but also parts of the Ozarks. Due to its strongly stereotypical connotations, the term can be offensive to those Americans of Appalachian or Ozark heritage. "Hillbilly" first appeared in print in a 1900 New York Journal article, with the definition: "a Hill-Billie is a free and untrammeled white citizen of Alabama, who lives in the hills, has no means to speak of, dresses as he can, talks as he pleases, drinks whiskey when he gets it, and fires off his revolver as the fancy takes him." The stereotype is two-fold in that it incorporates both positive and negative traits: “Hillbillies” are often considered independent and self-reliant individuals that resist the modernization of society, but at the same time they are also defined as backward, violent, and uncivilized. Scholars argue this duality is reflective of the split ethnic identities in “white America."